.PSLAB have designed the lighting for the Workshop kitchen and bar in Palm Springs, California.

wk_080313_01

Description from .PSLAB

.PSLAB’s primary aim was to highlight the multiple sections that comprised the site all the while integrating with the restaurant’s unique industrial style. The restaurant, characterized with a high cathedral-like ceiling required a lighting intervention that was both minimal and fits with the interior’s modern concept. The lighting interventions differed depending on the sections; however the light fixtures used for each section followed the same style to maintain the concept of one single space.

wk_080313_04

.

A major insertion was made to the restaurant’s ridge beam, in the form of suspended black metal rods equipped at its extremity with a light bulb. These suspensions, placed above the central concrete table in a parallel fashion, were placed along the space’s center axis and scattered between the wooden beams making up the ceiling’s structure.

wk_080313_06

.

Table-mounted light fixtures were used for the seating booths to add depth to these sections. These fixtures are comprised of a supporting plate from which extend three black steel fixtures finished with exposed light bulbs. .PSLAB was able to create alignment between the booths on opposite ends of each other by placing the light fixtures within the same axis.

wk_080313_02

.

Above the bar section, ceiling mounted metal rods in 3 groupings of 6 were fixed along the ceiling and as they reach the bar counter, they drop down to provide lighting to the bar’s seating section. Opposite from the bar, at the other end of the restaurant, the same fixtures in three clusters adorn the ceiling of the private section, creating a mirroring effect.

The products used, made from steel and with a blackened copper plated steel finish, were designed and manufactured by .PSLAB in their own factory.

wk_080313_05

Lighting Designers: .PSLAB

Design Practice: SOMA Architects